Flag	Purpose
`-i <iface>`	Interface to capture on
`-r <file>`	Read from PCAP file (instead of live capture)
`-w <file>`	Write captured packets to PCAP file
`-n`	No DNS resolution (IP addresses only)
`-nn`	No DNS + no port name resolution (shows port numbers)
`-v`	Verbose output
`-vv`	More verbose (full TCP flags, options)
`-vvv`	Maximum verbosity
`-s <n>`	Snap length (0 = unlimited, capture full packets)
`-c <n>`	Capture exactly n packets then stop
`-A`	Print packet payload as ASCII
`-X`	Print packet payload as hex + ASCII
`-XX`	Print packet header + payload as hex + ASCII
`-q`	Quiet — minimal output
`-e`	Print link-layer header (MAC addresses)
`-tttt`	Human-readable timestamps
`-D`	List available interfaces
`-G <n>`	Rotate capture file every n seconds
`-C <n>`	Rotate capture file every n MB
`-Z <user>`	Drop privileges after capture starts
`host`	BPF primitive — filter by IP
`port`	BPF primitive — filter by port
`net`	BPF primitive — filter by network

Capture Patterns

Basic capture to file

# List interfaces
tcpdump -D

# Capture all traffic on interface
sudo tcpdump -i eth0 -nn -s 0 -w capture.pcap

# Capture limited packets
sudo tcpdump -i eth0 -nn -s 0 -c 1000 -w capture.pcap

# Capture with timestamps + verbose
sudo tcpdump -i eth0 -nn -s 0 -tttt -w capture.pcap

Targeted captures

# Specific host
sudo tcpdump -i eth0 -nn -s 0 -w host.pcap 'host 10.10.10.5'

# Specific port
sudo tcpdump -i eth0 -nn -s 0 -w http.pcap 'port 80'

# Port range
sudo tcpdump -i eth0 -nn -s 0 'portrange 8000-9000'

# Specific protocol
sudo tcpdump -i eth0 -nn -s 0 -w dns.pcap 'udp port 53'
sudo tcpdump -i eth0 -nn -s 0 -w icmp.pcap 'icmp'

# HTTP + HTTPS
sudo tcpdump -i eth0 -nn -s 0 -w web.pcap 'port 80 or port 443'

# Exclude noise (focus on external traffic)
sudo tcpdump -i eth0 -nn -s 0 -w external.pcap 'not net 192.168.0.0/16 and not net 10.0.0.0/8'

# SYN packets only (new connections)
sudo tcpdump -i eth0 -nn 'tcp[tcpflags] & tcp-syn != 0 and tcp[tcpflags] & tcp-ack == 0'

# RST packets (connection resets, scan indicators)
sudo tcpdump -i eth0 -nn 'tcp[tcpflags] & tcp-rst != 0'

Reading and Filtering Existing PCAPs

# Read and display
tcpdump -nn -r capture.pcap

# Verbose display
tcpdump -nn -vv -r capture.pcap

# Filter while reading
tcpdump -nn -r capture.pcap 'port 80'
tcpdump -nn -r capture.pcap 'host 10.10.10.5'
tcpdump -nn -r capture.pcap 'src host 10.10.10.5 and dst port 443'

# Write filtered subset to new PCAP
tcpdump -nn -r capture.pcap -w filtered.pcap 'port 80'

# Show only SYN packets (connection initiations)
tcpdump -nn -r capture.pcap 'tcp[tcpflags] == tcp-syn'

# Extract specific time window
tcpdump -nn -r capture.pcap -w window.pcap 'greater 14:30:00 and less 15:00:00'

Payload Extraction

# Print ASCII payload (HTTP, cleartext passwords, etc.)
tcpdump -nn -A -r capture.pcap 'port 80'

# Print hex + ASCII
tcpdump -nn -X -r capture.pcap 'port 21'   # FTP — may expose credentials

# Extract only payload bytes (for file recovery)
tcpdump -nn -A -r capture.pcap 'port 80' | grep -v "^[0-9a-f][0-9a-f]:[0-9a-f]" | grep -v "^$"

# Find strings in PCAP payload
tcpdump -nn -A -r capture.pcap 2>/dev/null | grep -i "password\|passwd\|pass=\|login\|credential"

# HTTP POST body extraction
tcpdump -nn -A -r capture.pcap 'tcp port 80 and (tcp[tcpflags] & tcp-push != 0)' | grep -A 20 "POST"

# Find flags or specific patterns in payloads
tcpdump -nn -A -r capture.pcap 2>/dev/null | grep -iE "flag\{|HTB\{|picoCTF"

BPF Filter Syntax Reference

Primitives

host 192.168.1.1          # src or dst IP
src host 192.168.1.1      # source IP only
dst host 192.168.1.1      # destination IP only
net 192.168.1.0/24        # CIDR network
src net 10.0.0.0/8
port 80                   # src or dst port
src port 1234
dst port 443
portrange 1024-65535
tcp                       # protocol
udp
icmp
arp

Operators

and / &&                  # both conditions
or / ||                   # either condition
not / !                   # negation

Complex filters

# Traffic between two hosts
'host 192.168.1.1 and host 192.168.1.2'

# From source to specific port
'src host 10.10.10.5 and dst port 4444'

# Any of multiple ports
'port 80 or port 8080 or port 8443'

# Exclude specific host from capture
'not host 10.0.0.1'

# TCP SYN-ACK only (established connections)
'tcp[tcpflags] & (tcp-syn|tcp-ack) == (tcp-syn|tcp-ack)'

# Large packets (data transfer detection)
'greater 1400'

# VLAN traffic
'vlan'

# IPv6
'ip6'

# HTTP GET requests (match method in payload)
'tcp port 80 and tcp[((tcp[12:1] & 0xf0) >> 2):4] = 0x47455420'   # "GET "

Investigation Workflows

Workflow 1: Quick PCAP triage

# Overview — what hosts, ports, protocols?
tcpdump -nn -q -r capture.pcap | awk '{print $3, $5}' | sort | uniq -c | sort -rn | head 30

# Unique source IPs
tcpdump -nn -r capture.pcap | awk '{print $3}' | cut -d. -f1-4 | sort | uniq -c | sort -rn

# Unique destination ports
tcpdump -nn -r capture.pcap | grep -oP 'dst \d+\.\d+\.\d+\.\d+\.\K\d+' | sort | uniq -c | sort -rn

Workflow 2: Extract cleartext credentials

# FTP (port 21)
tcpdump -nn -A -r capture.pcap 'port 21' | grep -iE "USER|PASS"

# HTTP Basic Auth
tcpdump -nn -A -r capture.pcap 'port 80' | grep -i "Authorization: Basic"

# Telnet
tcpdump -nn -A -r capture.pcap 'port 23'

# SMTP credentials
tcpdump -nn -A -r capture.pcap 'port 25' | grep -iE "auth|user|pass"

Workflow 3: Detect port scanning

# Many SYN packets from same source (SYN scan)
tcpdump -nn -r capture.pcap 'tcp[tcpflags] == tcp-syn' | awk '{print $3}' | \
  cut -d. -f1-4 | sort | uniq -c | sort -rn | head

# RST flood (close scan, rejected ports)
tcpdump -nn -r capture.pcap 'tcp[tcpflags] & tcp-rst != 0' | wc -l

# UDP probe packets (UDP scan)
tcpdump -nn -r capture.pcap 'udp' | awk '{print $5}' | sort | uniq -c | sort -rn

Workflow 4: Find C2 beaconing

# Regular intervals from same source to same dest
tcpdump -nn -r capture.pcap 'host SUSPECT_IP' | awk '{print $1}' | \
  awk 'NR>1{printf "%.1f\n", $1-prev} {prev=$1}' | sort | uniq -c | sort -rn | head

# Long-duration connection (persistent C2)
# → look for connections with many packets over long time window

Workflow 5: Extract files from PCAP

# Better with Wireshark: File → Export Objects → HTTP
# CLI alternative with tcpflow:
sudo apt install tcpflow
tcpflow -r capture.pcap -o output_dir/

# Or with NetworkMiner (Windows GUI)
# Or reassemble TCP streams with tshark:
tshark -r capture.pcap -z follow,tcp,raw,0 2>/dev/null | xxd -r -p > stream0.bin

Useful Combinations

# Live capture → immediate grep (no file)
sudo tcpdump -i eth0 -nn -A 2>/dev/null | grep -i "password\|flag\|secret"

# Save and display simultaneously
sudo tcpdump -i eth0 -nn -s 0 -w capture.pcap | tcpdump -nn -r -

# Rotate files every 5 minutes (long capture)
sudo tcpdump -i eth0 -nn -s 0 -G 300 -w "capture_%Y%m%d_%H%M%S.pcap"

# Split large PCAP into smaller chunks
tcpdump -nn -r huge.pcap -w small.pcap -C 100  # 100MB chunks

# Count packets by protocol
tcpdump -nn -q -r capture.pcap | awk '{print $2}' | sort | uniq -c | sort -rn

# Convert PCAP to text for grep
tcpdump -nn -tttt -r capture.pcap > capture.txt
grep -i "interesting_string" capture.txt

Integration

Tool	Use case
`wireshark` / `tshark`	Deep protocol dissection, file extraction, stream following
`zeek`	Convert PCAP to structured logs (dns.log, http.log, etc.)
`strings`	Quick string extraction from raw PCAP
`scapy` (Python)	Scripted PCAP parsing and packet manipulation
`tcpflow`	TCP stream reassembly and file extraction from PCAP
`binwalk`	Carve embedded files from reassembled streams
`yara`	Scan packet payloads for patterns

Resources

File	When to load
`references/`	BPF filter recipes, tshark equivalents, complex protocol analysis patterns

tcpdump

tcpdump

Installation

Core Flags Reference