layout-placement
Run KiCad's CLI as plain kicad-cli (in Backplane, the KiCad Backplane has selected, first on your PATH; $BACKPLANE_KICAD_CLI is the same program), never by another install's path.
PCB component placement
Placement decides most of what routing can achieve. A part in the wrong place makes a track long, a current loop large, or a pad unreachable, and no routing fixes that later. Good placement gives every connection that carries fast-changing current a short, direct path, keeps a channel open for every other connection, and passes placement DRC (courtyards, clearance, board edge) with zero errors.
This skill is experimental. It was developed against a few small Nordic QFN benchmark boards and has not been qualified for electrical, RF or manufacturing sign-off. Its scripts check placement geometry under simple rules. Where their results and the datasheet or the vendor's reference layout disagree, follow the datasheet and the reference.