parametric-cad-design

Installation
SKILL.md

Parametric CAD Design

Use this skill for agent-assisted mechanical design where the deliverable should remain editable and reproducible, not just a one-off mesh.

Core Workflow

  1. Inspect source files before designing. Prefer .shapr package metadata, STEP labels, measured bounding boxes, datasheets, and old README notes over visual guesses.
  2. For asymmetric modules, define the source face, mating face, optical axis, PCB long axis, PCB short axis, and sign convention before changing geometry. Write the source-to-holder transform explicitly.
  3. Decide the mode: exact B-rep regeneration, surgical print-fit variant, or new clean parametric design. Do not mix these silently.
  4. Keep dimensions in named parameters. Do not globally scale a whole part to tune fit.
  5. Preserve prior project runs inside the same design folder. Use runs/run-N-human-readable-info-YYYYMMDDTHHMMSSZ/ for archived runs and keep the root artifacts/ directory as the latest checked output.
  6. Export editable source, decomposed STEP bodies, assembly STEP, printable STL, and full-view render PNG. Add exploded/detail renders when geometry is hard to inspect.
  7. Validate STEP import, solid count, bounding box, mesh watertight/component count, and render before committing.
  8. Put one directly usable final STEP at the design root as USE_THIS_<design>.step when there are many artifact STEP files. Keep reference/cutter/smooth variants under artifacts/.
  9. When the user asks for Nutstore sync, or when generating final LabCanvas CAD handoff artifacts, copy the final root USE_THIS_*.step or final *_assembly.step/*_assembled.step to /home/lachlan/Nutstore Files/Projects/LabCanvas with its descriptive filename intact.

When Shapr3D archives, OpenHI/Nature geometry, C-mount, optical holders, or sensor/PCB holders are involved, read references/shapr3d-cad-patterns.md after this file. When a PCB photo, sketch, rear view, component view, or mating face controls an asymmetric holder, also read references/pcb-sensor-mating-face-orientation.md. When joining round OpenHI/4F tubes inside a thin square envelope, also read references/openhi-square-tube-connectors.md.

Installs
3
GitHub Stars
1
First Seen
Oct 1, 2026