Detect and Capture RF Signals on NI USRP Radios

Reference Loading

Code patterns (required at Step 4): for the seven copy-ready capture patterns (A–G) and the loopback table, Read references/patterns.md before generating any capture code.
API reference (required at Step 3): Read references/api.md for signatures, property ranges, and threshold constraints. Every generation validates parameters against it before emitting code — see the Always rule below. This read is not optional.
On demand: references/overview.md — conceptual architecture and detector behavior.
On demand, after a failure only: references/threshold-calibration.md — the calibration sub-workflow (plotDetectionSignals / plotThreshold step-by-step). Do not load it during first-time code generation.

This skill exposes one sub-workflow that is loaded on demand from references/:

Sub-workflow	What it provides
Threshold Calibration (`references/threshold-calibration.md`)	Step-by-step plot -> diagnose -> tune procedure for both `energyDetector` and `preambleDetector`, plus combined symptom -> cause -> fix table

Route into references/threshold-calibration.md whenever any of these conditions hold: