Install okx CLI:
```
npm install -g @okx_ai/okx-trade-cli
```

Configure credentials:

okx config init

Or set environment variables:

export OKX_API_KEY=your_key
export OKX_SECRET_KEY=your_secret
export OKX_PASSPHRASE=your_passphrase

Test with demo mode:
```
okx --profile demo account balance
```

Credential & Profile Check

Run this check before any authenticated command.

Step A — Verify credentials

okx config show       # verify configuration status (output is masked)

If the command returns an error or shows no configuration: stop all operations, guide the user to run okx config init, and wait for setup to complete before retrying.
If credentials are configured: proceed to Step B.

Step B — Confirm profile (required)

--profile is required for all authenticated commands. Never add a profile implicitly.

Value	Mode	Funds
`live`	实盘	Real funds
`demo`	模拟盘	Simulated funds

Resolution rules:

Current message intent is clear (e.g. "real" / "实盘" / "live" → live; "test" / "模拟" / "demo" → demo) → use it and inform the user: "Using --profile live (实盘)" or "Using --profile demo (模拟盘)"
Current message has no explicit declaration → check conversation context for a previous profile:
- Found → use it, inform user: "Continuing with --profile live (实盘) from earlier"
- Not found → ask: "Live (实盘) or Demo (模拟盘)?" — wait for answer before proceeding

Handling 401 Authentication Errors

If any command returns a 401 / authentication error:

Stop immediately — do not retry the same command
Inform the user: "Authentication failed (401). Your API credentials may be invalid or expired."
Guide the user to update credentials by editing the file directly with their local editor:
```
~/.okx/config.toml
```
Update the fields api_key, secret_key, passphrase under the relevant profile. Do NOT paste the new credentials into chat.
After the user confirms the file is updated, run okx config show to verify (output is masked)
Only then retry the original operation

Demo vs Live Mode

Profile is the single control for 实盘/模拟盘 switching — exactly two options:

`--profile`	Mode	Funds
`live`	实盘	Real funds
`demo`	模拟盘	Simulated funds

okx --profile live  account balance     # 实盘
okx --profile demo  account balance     # 模拟盘 (simulated balance)

Rules:

Read commands (balance, positions, bills, etc.): always state which profile was used
Write commands (transfer, set-position-mode): profile must be confirmed before execution (see "Credential & Profile Check" Step B); transfer especially — wrong profile means wrong account
Every response after a command must append: [profile: live] or [profile: demo]
Do not use the --demo flag — use --profile instead

Skill Routing

For market data (prices, charts, depth, funding rates) → use okx-cex-market
For account balance, P&L, positions, fees, transfers → use okx-cex-portfolio (this skill)
For regular spot/swap/futures/algo orders → use okx-cex-trade
For grid and DCA trading bots → use okx-cex-bot

Quickstart

# Trading account balance (all currencies with balance > 0)
okx account balance

# Check USDT balance only
okx account balance USDT

# Funding account balance
okx account asset-balance

# All open positions
okx account positions

# Closed position history with realized PnL
okx account positions-history

# Recent account bills (last 100)
okx account bills

# My trading fee tier
okx account fees --instType SPOT

# Transfer 100 USDT from funding (6) to trading (18)
okx account transfer --ccy USDT --amt 100 --from 6 --to 18

Command Index

Read Commands

#	Command	Type	Description
1	`okx account balance [ccy]`	READ	Trading account equity, available, frozen
2	`okx account asset-balance [ccy] [--valuation]`	READ	Funding account balance; `--valuation` adds earn/trading/funding valuation summary
3	`okx account positions`	READ	Open contract/swap positions
4	`okx account positions-history`	READ	Closed positions + realized PnL
5	`okx account bills`	READ	Account ledger (deposits, withdrawals, trades)
6	`okx account fees --instType <type>`	READ	My trading fee tier (maker/taker)
7	`okx account config`	READ	Account level, position mode, UID
8	`okx account max-size --instId <id> --tdMode <mode>`	READ	Max buy/sell size at current price
9	`okx account max-avail-size --instId <id> --tdMode <mode>`	READ	Available size for next order
10	`okx account max-withdrawal [ccy]`	READ	Max withdrawable per currency

Write Commands

#	Command	Type	Description
11	`okx account set-position-mode <mode>`	WRITE	Switch net/hedge position mode
12	`okx account transfer`	WRITE	Transfer funds between accounts

Cross-Skill Workflows

Pre-trade balance check

User: "I want to buy 0.1 BTC — do I have enough USDT?"

1. okx-cex-portfolio okx account balance USDT               → check available equity
2. okx-cex-market    okx market ticker BTC-USDT              → check current price
        ↓ user approves
3. okx-cex-trade     okx spot place --instId BTC-USDT --side buy --ordType market --sz 0.1

Pre-bot balance check

User: "I want to start a BTC grid bot with 1000 USDT"

1. okx-cex-portfolio okx account balance USDT               → confirm available funds ≥ 1000
2. okx-cex-market    okx market candles BTC-USDT --bar 4H --limit 50  → determine price range
        ↓ user approves
3. okx-cex-bot       okx bot grid create --instId BTC-USDT --algoOrdType grid \
                       --minPx 90000 --maxPx 100000 --gridNum 10 --quoteSz 1000

Review open positions and P&L

User: "Show me my current positions and how they're performing"

1. okx-cex-portfolio okx account positions                  → open positions with UPL
2. okx-cex-portfolio okx account positions-history          → recently closed positions
3. okx-cex-market    okx market ticker BTC-USDT-SWAP        → check current price vs entry

Transfer and trade

User: "Move 500 USDT from my funding account to trade BTC"

1. okx-cex-portfolio okx account asset-balance USDT         → confirm funding balance ≥ 500
        ↓ user approves
2. okx-cex-portfolio okx account transfer --ccy USDT --amt 500 --from 6 --to 18
3. okx-cex-portfolio okx account balance USDT               → confirm trading balance updated
        ↓ ready to trade
4. okx-cex-trade     okx spot place ...

Check max position size before entering

User: "How much BTC can I buy with cross margin?"

1. okx-cex-portfolio okx account balance                    → total equity
2. okx-cex-portfolio okx account max-size --instId BTC-USDT-SWAP --tdMode cross  → max buy/sell size
3. okx-cex-market    okx market ticker BTC-USDT-SWAP        → current price reference

Operation Flow

Step 0 — Credential & Profile Check

Before any authenticated command:

Determine profile (required):

Options: live (实盘) or demo (模拟盘) — exactly these two values

Current message intent clear (e.g. "real"/"实盘"/"live" → live; "test"/"模拟"/"demo" → demo) → use it, inform user: "Using --profile live (实盘)"
Current message has no explicit declaration → check conversation context for previous profile:
- Found → use it, inform user: "Continuing with --profile live (实盘) from earlier"
- Not found → ask: "Live (实盘) or Demo (模拟盘)?" — wait for answer

If no credentials configured: guide user to run okx config init, stop all trading actions

After every command result: append [profile: live] or [profile: demo] to the response

Step 1: Identify account action

Check balance → okx account balance (trading) or okx account asset-balance (funding)
View open positions → okx account positions
View closed positions + PnL → okx account positions-history
View transaction history → okx account bills
Check fee tier → okx account fees
Check account settings → okx account config
Calculate order size → okx account max-size or okx account max-avail-size
Check withdrawal limit → okx account max-withdrawal
Transfer funds → okx account transfer
Change position mode → okx account set-position-mode

Step 2: Run read commands immediately — confirm profile (Step 0) then writes

Read commands (1–10): run immediately, no confirmation needed.

ccy filter: use currency symbol like USDT, BTC, ETH
--instType for fees/positions: SPOT, SWAP, FUTURES, OPTION
--archive for bills: access older records beyond the default window
--tdMode for max-size: cash (spot), cross, or isolated

Write commands (11–12): confirm once before executing.

set-position-mode: confirm mode (net = one-directional, long_short_mode = hedge mode); switching may affect open positions
transfer: confirm --ccy, --amt, --from, --to (account types: 6=funding, 18=trading); verify source balance first

Step 3: Verify after writes

After set-position-mode: run okx account config to confirm posMode updated
After transfer: run okx account balance and okx account asset-balance to confirm balances updated

CLI Command Reference

Account Balance — Trading Account

okx account balance [ccy] [--json]

Param	Required	Default	Description
`ccy`	No	-	Filter to a single currency (e.g., `USDT`)

Returns table: currency, equity, available, frozen. Only shows currencies with balance > 0.

Asset Balance — Funding Account

okx account asset-balance [ccy] [--valuation] [--json]

Param	Required	Default	Description
`ccy`	No	-	Filter to a single currency
`--valuation`	No	false	Also show total asset valuation across all account types (trading/funding/earn)

Returns: ccy, bal, availBal, frozenBal. Only shows currencies with balance > 0.

With --valuation: additionally prints a valuation summary table with totalBal and per-account-type breakdown (classic/earn/funding).

Positions — Open Positions

okx account positions [--instType <type>] [--instId <id>] [--json]

Param	Required	Default	Description
`--instType`	No	-	Filter: `SWAP`, `FUTURES`, `OPTION`
`--instId`	No	-	Filter to specific instrument

Returns: instId, instType, side (posSide), pos, avgPx, upl (unrealized PnL), lever. Only shows positions with size ≠ 0.

Positions History — Closed Positions

okx account positions-history [--instType <type>] [--instId <id>] [--limit <n>] [--json]

Returns: instId, direction, openAvgPx, closeAvgPx, realizedPnl, uTime.

Bills — Account Ledger

okx account bills [--archive] [--instType <type>] [--ccy <ccy>] [--limit <n>] [--json]

Param	Required	Default	Description
`--archive`	No	false	Access older records (archive endpoint)
`--instType`	No	-	Filter by instrument type
`--ccy`	No	-	Filter by currency
`--limit`	No	100	Number of records

Returns: billId, instId, type, ccy, balChg, bal, ts.

Fees — Trading Fee Tier

okx account fees --instType <type> [--instId <id>] [--json]

Param	Required	Default	Description
`--instType`	Yes	-	`SPOT`, `SWAP`, `FUTURES`, `OPTION`
`--instId`	No	-	Specific instrument (optional)

Returns: level, maker, taker, makerU, takerU, ts.

Config — Account Configuration

okx account config [--json]

Returns: uid, acctLv (account level), posMode (net/long_short_mode), autoLoan, greeksType, level, levelTmp.

Max Size — Maximum Order Size

okx account max-size --instId <id> --tdMode <mode> [--px <price>] [--json]

Param	Required	Default	Description
`--instId`	Yes	-	Instrument ID
`--tdMode`	Yes	-	`cash` (spot), `cross`, or `isolated`
`--px`	No	-	Reference price (uses mark price if omitted)

Returns: instId, maxBuy, maxSell.

Max Available Size

okx account max-avail-size --instId <id> --tdMode <mode> [--json]

Returns: instId, availBuy, availSell — the immediately available size for the next order.

Max Withdrawal

okx account max-withdrawal [ccy] [--json]

Returns table: ccy, maxWd, maxWdEx (with borrowing). Shows all currencies if no filter.

Set Position Mode

okx account set-position-mode <net|long_short_mode> [--json]

Value	Behavior
`net`	One-directional (default) — long and short net out
`long_short_mode`	Hedge mode — long and short can coexist

Warning: Switching modes when positions are open may cause unexpected behavior. Check okx account positions first.

Transfer Funds

okx account transfer --ccy <ccy> --amt <n> --from <acctType> --to <acctType> \
  [--transferType <type>] [--subAcct <name>] [--json]

Param	Required	Default	Description
`--ccy`	Yes	-	Currency to transfer (e.g., `USDT`)
`--amt`	Yes	-	Amount to transfer
`--from`	Yes	-	Source account type: `6`=funding, `18`=trading
`--to`	Yes	-	Destination account type: `6`=funding, `18`=trading
`--transferType`	No	`0`	`0`=within account, `1`=to sub-account, `2`=from sub-account
`--subAcct`	No	-	Sub-account name (required for sub-account transfers)

Returns: transId, ccy, amt.

MCP Tool Reference

Tool	Description
`account_get_balance`	Trading account balance
`account_get_asset_balance`	Funding account balance. Use `showValuation=true` to include total asset valuation across trading/funding/earn accounts.
`account_get_positions`	Open positions
`account_get_positions_history`	Closed position history
`account_get_bills`	Account bills (recent)
`account_get_bills_archive`	Account bills (archive)
`account_get_trade_fee`	Trading fee tier
`account_get_config`	Account configuration
`account_get_max_size`	Max order size
`account_get_max_avail_size`	Max available size
`account_get_max_withdrawal`	Max withdrawable
`account_set_position_mode`	Set position mode
`account_transfer`	Transfer between accounts

Input / Output Examples

"How much USDT do I have?"

okx account balance USDT
# → currency: USDT | equity: 5000.00 | available: 4500.00 | frozen: 500.00

"Show all my open positions"

okx account positions
# → table: instId, instType, side, pos, avgPx, upl, lever

"What's my trading history and realized PnL?"

okx account positions-history
# → table: instId, direction, openAvgPx, closeAvgPx, realizedPnl, uTime

"Show my recent account activity"

okx account bills --limit 20
# → table: billId, instId, type, ccy, balChg, bal, ts

"What are my trading fees for SWAP?"

okx account fees --instType SWAP
# → level: VIP1 | maker: -0.0001 | taker: 0.0005

"How much BTC can I buy in cross margin?"

okx account max-size --instId BTC-USDT-SWAP --tdMode cross
# → instId: BTC-USDT-SWAP | maxBuy: 12.5 | maxSell: 12.5

"Transfer 200 USDT from funding to trading"

okx account transfer --ccy USDT --amt 200 --from 6 --to 18
# → Transfer: TXN123456 (USDT 200)

"Check my account config"

okx account config
# → uid: 123456789 | acctLv: 2 | posMode: net | autoLoan: false

Edge Cases

No balance shown: balance is filtered to > 0 — if nothing shows, all currencies have zero balance
Positions command returns empty: no open contracts; spot holdings are not shown here (use account balance)
bills --archive: required for transactions older than 7 days (default window); may be slower
set-position-mode: cannot switch to net if you have both long and short positions on the same instrument
transfer --from/--to codes: 6=funding account, 18=trading account; other values exist for sub-account flows
max-size vs max-avail-size: max-size is the theoretical maximum; max-avail-size accounts for existing orders and reserved margin
Demo mode: okx --profile demo account balance shows simulated balances, not real funds

Global Notes

All write commands require valid credentials in ~/.okx/config.toml or env vars
--profile <name> is required for all authenticated commands; see "Credential & Profile Check" section
Every command result includes a [profile: <name>] tag for audit reference
--json returns the raw OKX API v5 response by default. Add --env to wrap the output as {"env": "<live|demo>", "profile": "<name>", "data": <response>}
Rate limit: 10 requests per 2 seconds for account endpoints
Positions shown are for the unified trading account; funding account assets are separate
Account types: 6=Funding Account (deposits/withdrawals), 18=Unified Trading Account (spot + derivatives)

okx-cex-portfolio

OKX CEX Portfolio & Account CLI

Preflight

Prerequisites