ID	Pattern	File reference
PC-5	Dormant state: DisableSimulation via FSM	`eaistate_dormant.c:1-17`
PC-11	Fighting FSM: hysteresis + guard clauses	`eaistate_fighting.c:18-38`
PC-13	FSM loaded from XML + sub-FSM composition	`eAIBase.c:661-666`, `Master.xml:3-8`
PC-9a	FOV pre-filter before LOS raycast	`eAIBase.c:8156-8168`
PC-9b	LOS throttle adaptive to update interval	`eAIBase.c:8089-8097`
PC-14	Threat cache with jitter 250-300 ms	`eAITargetInformationState.c:58-67`
PC-7	Staggered target scan + jitter 0.1-0.2 s	`eAIBase.c:2962-2966`
PC-2	Backoff 5x: no players in visibility	`ExpansionWorld.c:247-250`
PC-15	Pathfinding: recalc thresholds + cost	`ExpansionPathHandler.c:581-592`
PC-16	Path filters: navmesh costs (door=10000)	`expansionpathfilters.c:131-147`
PC-17	Group targets: distribution by tracking	`eAIGroup.c:726`, `eAIBase.c:3497-3505`
PC-18	Formation positions: cached + jitter 2-4s	`eAIGroup.c:822-830`

Server-side scheduling/throttling principles (budget-per-frame, FPS-adaptive interval, rolling average, modulo-gating): canonical server-perf write-up: enforce-script-reference/references/server-performance.md (PC-2/PC-7/PC-9b in THIS skill are the eAI-specific instances). For #ifdef SERVER vs IsServer() side checks and ScriptInvoker lifecycle, enforce-script-reference does apply (hard rules 17-20, 28).

FSM Architecture

PC-13 — FSM loaded from XML; sub-FSM composition

eAIBase.c:661-666 + Scripts/FSM/Master.xml:3-8

LoadFSM() calls ExpansionFSMType.LoadXML(...), then Spawn(...) and StartDefault(). Master.xml includes sub-FSMs for Vehicles, Fighting, and Reloading. Dormant is a state in the master.

Key implication: state composition changes via XML, not Enforce code. Adding or removing states does not require a code recompile.

Full detail: references/eai-fsm-combat.md — PC-13.

PC-5 — Dormant state: DisableSimulation managed by FSM

eaistate_dormant.c:1-17

On enter: unit.DisableSimulation(true). On exit: unit.DisableSimulation(false). Entry conditions checked by FSM transitions: no combat, no players within visibility range, no pending waypoints, no active movement, leader is an AI unit.

Do not scatter DisableSimulation calls across logic — let the FSM state own that toggle. The FSM exit restores simulation; no caller needs to remember to re-enable it.

Full detail: references/eai-fsm-combat.md — PC-5.

Vanilla infected mind-state: `MINDSTATE_COWER` (since 1.30 Exp)

This is not Expansion eAI. Vanilla DayZInfected gained DayZInfectedConstants.MINDSTATE_COWER after MINDSTATE_FIGHT (exp\scripts\scripts\3_Game\Entities\DayZInfected.c:18). ZombieBase syncs m_MindState with range -1..5 (ZombieBase.c:54). On the sandstorm cower state the infected holds the calm idle pose (SetIdleState(0)); native AI already stopped movement (ZombieBase.c:474-478). [EXACT] blocks: references/dayz-1-30-ai.md.

Combat FSM

PC-11 — Fighting FSM: hysteresis thresholds and guard clause chain

eaistate_fighting.c:18-38 (enter/exit logic) eaistate_fighting_fireweapon.c:78 (fire sub-FSM guards)

Enter combat when GetThreatToSelf() >= 0.4. Exit when it drops below 0.2. The gap prevents oscillation when threat hovers around a single value.

Guard clauses before enter: IsRestrained, IsUnconscious, IsInTransport, GetRunningAction. The fire-weapon sub-FSM has its own chain: IsRestrained -> GetTarget -> IsFighting. IsFightingFSM flag is set so external systems can query combat state without inspecting the FSM directly.

Hysteresis rule: always set enter > exit. A single threshold creates a flip-flop bug in practice.

Full detail: references/eai-fsm-combat.md — PC-11.

Threat & Targeting

PC-14 — Threat cache with jitter 250-300 ms

eAITargetInformationState.c:58-67

if (force || diff > Math.RandomIntInclusive(250, 300))
{
    m_ThreatLevelUpdateTimestamp = time;
    m_ThreatLevel = m_Info.CalculateThreat(m_AI, this);

Each target information state carries its own timestamp and a per-call random cooldown. CalculateThreat runs at most once per ~275 ms on average. The jitter means AIs do not all recalculate threat on the same server tick.

Full detail: references/eai-pathfinding-groups.md — PC-14.

PC-7 — Staggered target scan: persistent index + jitter 0.1-0.2 s

eAIBase.c:2962-2966

m_eAI_UpdateTargetsTick += pDt;
if (m_eAI_CurrentPotentialTargetIndex >= m_eAI_PotentialTargetEntities.Count()
    && m_eAI_UpdateTargetsTick > Math.RandomFloat(0.1, 0.2))
{
    m_eAI_UpdateTargetsTick = 0;
    m_eAI_CurrentPotentialTargetIndex = 0;

UpdateTargets advances one index per tick rather than scanning the entire list. A full refresh only happens when the index is exhausted AND the random interval has passed. Prevents all AIs from finishing their scan simultaneously.

Full detail: references/eai-pathfinding-groups.md — PC-7.

LOS / FOV

PC-9a — FOV pre-filter before LOS raycast

eAIBase.c:8156-8168

eAI_CalculateFOVHalfAngleH produces the effective half-angle (stance-adjusted). If angleDiffH > threshAngleH, the candidate is discarded before a raycast is issued. Angle comparison costs nanoseconds; a raycast costs microseconds to milliseconds depending on scene complexity.

Apply cheap spatial tests (angle, range band) before expensive ones (raycast, physics query).

Full detail: references/eai-fsm-combat.md — PC-9 (Codex angle).

PC-9b — LOS throttle adaptive to current update interval

eAIBase.c:8089-8097

if (s_eAI_FTO < 2)
    interval = LOS_CHECK_INTERVAL;
else
    interval = LOS_CHECK_INTERVAL * (pDt / ExpansionWorld.AI_UPDATE_INTERVAL);
if (m_eAI_LOSCheckDT < interval && !m_eAI_TargetChanged)
    return state.m_LOS;

In scheduler mode (s_eAI_FTO >= 2) the LOS interval scales with pDt. An AI updated at 5x the base interval does not get 5x the LOS check rate — the effective check frequency remains constant. Setting m_eAI_TargetChanged = true forces a fresh check, bypassing the cache.

Full detail: references/eai-pathfinding-groups.md — PC-9 (Claude angle).

PC-2 — Backoff 5x when no players within visibility distance (AI-specific)

ExpansionWorld.c:247-250

if (eAIBase.s_eAI_FTO >= 2 && ai.m_eAI_PlayersWithinVisibilityDistanceLimit.Count() == 0)
    updateIntervalCurrent = AI_UPDATE_INTERVAL * 5;
else
    updateIntervalCurrent = updateInterval;

When no player is within the AI's visibility range, its update interval degrades from ~50 ms to ~250 ms. Logic is not disabled — it runs at one-fifth frequency. Condition is AI-local: each unit decides its own backoff independently.

This is the AI-specific implementation of the backoff principle (degrade frequency by relevance). Canonical server-perf write-up: enforce-script-reference/references/server-performance.md (PC-2/PC-7/PC-9b are the eAI-specific instances).

Pathfinding

PC-15 — Path recalculation with thresholds and measured cost

ExpansionPathHandler.c:581-592

ExpansionPathHandler does not recalculate on every target update. Three guards:

PATH_RECALCULATE_THRESHOLD: minimum positional delta before path is stale
m_MinTimeUntilNextUpdate: cooldown between recalcs
m_TimeIt.GetElapsed(): actual cost measurement per recalc (feedback for adaptive scheduling)

Legacy path: eAIPathFinding, activated with #define EAI_USE_LEGACY_PATHFINDING. Default is ExpansionPathHandler.

Full detail: references/eai-pathfinding-groups.md — PC-15.

PC-16 — Path filters with navmesh costs; DOOR_OPENED = 10 000

expansionpathfilters.c:131-147

SetFilterCost per area type: CRAWL, CROUCH, JUMP, DEEP_WATER = 10. DOOR_OPENED = 10 000. Cost 10 000 is effectively prohibitive — the pathfinder routes around an open door rather than through it (avoids collision with door physics geometry).

Filters encode behavioral preferences, not just include/exclude flags. A cost of 10 000 is a soft prohibition without a hard constraint.

Full detail: references/eai-pathfinding-groups.md — PC-16.

Group & Formation

PC-17 — Group target distribution: prevents squad over-concentration

eAIGroup.c:726 + eAIBase.c:3497-3505

eAIGroup.AddTarget distributes target data to members. Before assigning target X to a member, eAIBase checks num_ai_in_group_not_tracking: if it reaches 0 (everyone already tracks X), returns false. The squad naturally distributes across multiple enemies without explicit assignment logic.

If all bots are chasing the same player, check whether num_ai_in_group_not_tracking logic is intact and AddTarget is being called rather than bypassed.

Full detail: references/eai-pathfinding-groups.md — PC-17.

PC-18 — Formation positions cached with per-AI jitter 2-4 s

eAIGroup.c:822-830

GetFormationPosition checks m_eAI_FormationPositionUpdateTime with Math.RandomFloat(2.0, 4.0). Each member has its own jitter window. When the leader moves, members do not all recalculate simultaneously — they spread the recalc over a 2 s window.

Formation recalc is per-AI, not per-group. The group does not broadcast "recalculate now" to all members.

Full detail: references/eai-pathfinding-groups.md — PC-18.

Animal & Group AI Templates (vanilla, since 1.30 Exp)

Nasdara ships native group-behaviour templates in GroupBehaviourTemplates (exp\nasdara__data_nasdara\DZ\data_takistan\aiconfigs\config.cpp:14-132). These are not Expansion eAI FSMs.

DZMouflonGroupBeh — type = "DomesticHerbivores": graze/rest lifecycle, safeKeeperIntervalMin/Max, catch-up radii (:16-67).
DZDogGroupBeh — type = "Predators": zoneType = "HuntingGround", siegeAttackCountdownMin/Max, huntAttackCountdownMin/Max, safeKeeperIntervalMin/Max (:68-127).

[DESIGN] Custom maps that want the same packs copy these classes (or inherit them) in their own aiconfigs rather than reimplementing predator/herbivore FSMs in script. [EXACT] blocks: references/dayz-1-30-ai.md.

References

references/eai-fsm-combat.md — PC-5, PC-11, PC-13, PC-9a
references/eai-pathfinding-groups.md — PC-14, PC-7, PC-2, PC-9b, PC-15, PC-16, PC-17, PC-18
references/dayz-1-30-ai.md — 1.30 Exp: native noise attenuation, MINDSTATE_COWER, AIParams, animal group templates

NoiseSystem — feeding noise the AI can hear (added 2026-06-06)

Source-verified vs vanilla v1.24 (3_game/noise.c:1-23):

Server-side API: g_Game.GetNoiseSystem().AddNoise(entity, params, mult) / AddNoisePos(entity, pos, params, mult) / AddNoiseTarget(pos, lifetimeSec, params, mult).
AddNoiseTarget creates a positional decoy with a duration — infected/AI investigate a position with no entity attached (distraction devices, impacts).
NoiseParams.Load("CfgNoises_entry") or LoadFromPath(path).
(hasta 1.29: Rain/wind reduce effective noise: NoiseAIEvaluate.GetNoiseReduction(g_Game.GetWeather()) (player steps use it, dayzplayerimplement.c:3204-3208).) (desde 1.30 Exp: weather dampening is native. Query the factor the AI uses with NoiseSystem.GetEnvironmentNoiseReduction(vector pos) — exp\scripts\scripts\3_Game\Noise.c:13. NoiseAIEvaluate.GetNoiseReduction and Weather.GetNoiseReductionByWeather are [Obsolete] (SensesAIEvaluate.c:92-93, Weather.c:454-455). Player steps no longer pass a weather multiplier: noiseMultiplier = NoiseAIEvaluate.GetNoiseMultiplier(this) then AddNoise(noiseParams, noiseMultiplier) (DayZPlayerImplement.c:3472-3474). Infected voice noise is AddNoise(this, sound_event.m_NoiseParams) with no climate multiplier (ZombieBase.c:597-600). Tune rain/snow/fog/wind/sandstorm in class AIParams (exp\dz\DZ\data\aiconfigs\config.cpp:19-27). Do not also multiply AddNoise by a script weather factor — the engine applies native attenuation on the coordinate and you would double-dampen.)
Weapon shots are config-side: class NoiseShoot { strength = 82; type = "shot"; } in the weapon config (real mod example: IMPWMODPart2 MCXSpear config.cpp:73-77).

DayZ 1.30 Exp (build 1.30.164014)

What changes, what breaks, and the migration checklist. [EXACT] blocks: references/dayz-1-30-ai.md.

What changes

Native C++ noise attenuation. New proto GetEnvironmentNoiseReduction(vector pos) on NoiseSystem (Noise.c:12-13). HUD/debug reads it via PluginPresenceNotifier.c:155-158.
class AIParams gained snowfallToNoiseMultiplier = 5.0, fogToNoiseMultiplier = 10.0, windToNoiseMultiplier = 10.0, sandstormToNoiseMultiplier = 10.0 (1.29 had rain + sea only). [CHANGELOG] official text says weather handling is native and 'Weather.GetNoiseReductionByWeather' was removed; the method still exists as [Obsolete] (Weather.c:454-467) plus GetNoiseReductionByWeatherEx(object) (Weather.c:407-419).
Vanilla infected: MINDSTATE_COWER for sandstorm; net-sync range of m_MindState is 5.
Nasdara animal group templates DZMouflonGroupBeh / DZDogGroupBeh.
[CHANGELOG] navmesh file version has no backwards compatibility — regenerate navmesh for custom terrains (matters to eAI PC-15/PC-16). Navmesh can use a hide animation source via EntityType Navmesh config.

What breaks for a 1.29 AI / stealth mod

Compile warning [Obsolete("Use Weather.GetNoiseReductionByWeatherEx instead!")] if you still call GetNoiseReductionByWeather / NoiseAIEvaluate.GetNoiseReduction.
Overrides of GetNoiseReductionByWeather no longer change what native infected/animal AI actually hear — they hear the native AIParams curve.
Passing a weather-derived multiplier into AddNoise and letting the engine apply native reduction double-damps the event.
Custom terrains: old navmesh files will not load. [CHANGELOG]

Migration checklist

For the factor AI actually uses: GetGame().GetNoiseSystem().GetEnvironmentNoiseReduction(pos).
For HUD / old script math on a specific object: weather.GetNoiseReductionByWeatherEx(object).
To change how rain/snow/fog/wind/sandstorm dampen zombie hearing: edit class AIParams in DZ\data\aiconfigs\config.cpp (rainToNoiseMultiplier, snowfallToNoiseMultiplier, sandstormToNoiseMultiplier, …).
Call AddNoise(entity, params) without folding climate into external_strenght_multiplier.
If you spawn custom infected, keep m_MindState sync range covering MINDSTATE_COWER (5).
Custom maps: regenerate navmesh. Copy/inherit DZMouflonGroupBeh / DZDogGroupBeh if you want those packs.
Expansion eAI PC-5..PC-18 in this extract were not re-verified (Expansion scripts are not in exp\). Treat those cites as 1.29 Expansion research.

dayz-ai-patterns

DayZ Expansion AI Patterns (eAI)

Overview