home-network
Home Network — find the layer before spending money
The defining mistake in home networking is buying hardware to fix a problem that was never in the hardware. A new router does nothing for a congested channel, a badly placed access point, a saturated uplink, or an ISP fault — and the user has spent real money and still has the problem. Your job is to locate the layer first. Everything else in this skill follows from that.
Detail lives in five references, each loaded at the step that needs it: diagnostics.md (the measurements and what the numbers mean), wifi-tuning.md (the free fixes, in order), router-buying.md (what to buy, and when not to), connecting-machines.md (sharing files, screens, printers between machines), and network-security.md (the hardening baseline).
The four layers, and how to tell them apart
| Layer | Symptom pattern | The isolating test |
|---|---|---|
| Device | One machine is slow; everything else on the same Wi-Fi is fine | Test a second device in the same spot. If it's fine, stop looking at the network |
| Wi-Fi | Slow or dropping the further you get from the router, fine beside it; worse in the evening | Compare a wired test to a Wi-Fi test at the router, then Wi-Fi at the problem spot |
| Router / LAN | All devices affected, everywhere, including wired; internal transfers slow too | Wired test at the router is also bad |
| ISP / uplink | All devices affected, wired included; the router's own status page shows the fault; often time-of-day | Wired speed test at the router is bad and the router reports a healthy LAN |
The single most useful measurement is a wired test at the router. If wired is fine and Wi-Fi is bad, the ISP is innocent and the fix is free. If wired is bad too, no amount of Wi-Fi tuning will help and no new router will either. Do this before any other diagnosis; it eliminates half the possibilities in ninety seconds.